Cheapest heat pumps to run in Ohio
Ranked by estimated yearly cost if each model served the same 36,000 BTU/h (3-ton) load in Ohio, so size doesn't distort the comparison. Because Ohio's climate weights heating more heavily, HSPF2 (heating efficiency) matters most here. Choosing the most efficient model over the least efficient one in our database saves about $993 a year for the same load.
| # | Model | Type | Size | HSPF2 | SEER2 | 5°F kept | 3-ton cost/yr |
|---|---|---|---|---|---|---|---|
| 1 | Fujitsu AOUH09KTAP1 | Mini-split | 1 ton | 14 | 33.5 | 142% | $1,163 |
| 2 | Fujitsu AOUH12KTAP1 | Mini-split | 1 ton | 13.7 | 31.5 | 106% | $1,196 |
| 3 | Fujitsu AOUH15KTAP1 | Mini-split | 1 ton | 13 | 28.7 | 106% | $1,268 |
| 4 | Bryant 37MAHAQ09AA3 | Mini-split | 1 ton | 13.8 | 20.6 | 99% | $1,282 |
| 5 | Bryant 37MARAQ09AA3 | Mini-split | 1 ton | 13.9 | 19.6 | 78% | $1,289 |
| 6 | Bryant 37MARAQ18AA3 | Mini-split | 1.5 tons | 13.5 | 20 | 71% | $1,313 |
| 7 | Senville SENA-24HF-OG | Mini-split | 2 tons | 13.5 | 19 | 83% | $1,327 |
| 8 | Senville SENA-09HF-OG | Mini-split | 1 ton | 12.5 | 21.4 | 96% | $1,377 |
| 9 | Mitsubishi Electric SUZ-AA09NL*** | Mini-split | 1 ton | 12.9 | 17.6 | 53% | $1,399 |
| 10 | Bryant 37MAHAQ18AA3 | Mini-split | 1.5 tons | 12.4 | 18 | 90% | $1,435 |
| 11 | Senville SENA/09HF/OQ | Mini-split | 1 ton | 12 | 20.2 | 90% | $1,439 |
| 12 | Senville SENA-18HF-OG | Mini-split | 1.5 tons | 12.3 | 18 | 90% | $1,445 |
Best cold-weather performers for Ohio
Ohio is a cold state, so heating dominates the bill and backup resistance heat is the biggest risk to running costs. These cold-climate certified models keep the most of their heating capacity at 5°F.
- Size
- 1 ton
- HSPF2
- 14
- SEER2
- 33.5
- Heat at 5°F
- 142%
- Size
- 1 ton
- HSPF2
- 10.5
- SEER2
- 22
- Heat at 5°F
- 133%
- Size
- 1.5 tons
- HSPF2
- 10
- SEER2
- 20.5
- Heat at 5°F
- 120%
- Size
- 2.5 tons
- HSPF2
- 9
- SEER2
- 21
- Heat at 5°F
- 112%
- Size
- 1.5 tons
- HSPF2
- 11.4
- SEER2
- 24.5
- Heat at 5°F
- 112%
- Size
- 1.5 tons
- HSPF2
- 10
- SEER2
- 17.5
- Heat at 5°F
- 110%
- Size
- 1 ton
- HSPF2
- 11.2
- SEER2
- 30
- Heat at 5°F
- 108%
- Size
- 3 tons
- HSPF2
- 8.5
- SEER2
- 17.5
- Heat at 5°F
- 108%
Heat pump vs. gas furnace in Ohio
To heat the same home (2,000 full-load heating hours at 36,000 BTU/h) in Ohio, a typical heat pump (HSPF2 9.5) would cost about $1,469 a year, an efficient one (HSPF2 10) about $1,395, versus $1,012 for a 95% gas furnace and $1,202 for an older 80% furnace, at Ohio's average residential gas price of $13.85 per thousand cubic feet. With cheap gas and comparatively expensive electricity, gas heating is cheaper to run in Ohio. A dual-fuel system (heat pump plus gas backup) is often the lowest-cost setup here.
Heating only; a heat pump also provides cooling, while a furnace needs a separate air conditioner. Gas prices: EIA, residential, annual average. Compare all states.
Assumptions for Ohio
| Residential electricity price | 19.38¢/kWh (EIA Electric Power Monthly, Aug 2026, preliminary) |
| Climate group | Cold |
| Equivalent full-load heating hours | 2,000 per year |
| Equivalent full-load cooling hours | 800 per year |
Use the calculator on any model page to replace these with your own electricity rate and usage.
Frequently asked questions
How much does it cost to run a heat pump in Ohio?
Using Ohio's average residential electricity price of 19.38¢/kWh, a typical 3-ton, median-efficiency heat pump costs about $1,836 a year to run. The most efficient model in our database would cost about $1,163 for the same load.
Is electricity expensive in Ohio?
Ohio's residential rate of 19.38¢/kWh is 7% above the U.S. average of 18.16¢ and ranks #17 most expensive of 51 (EIA, August 2026).
Is heating or cooling the bigger cost in Ohio?
With our climate assumptions for Ohio (2,000 heating and 800 cooling hours), heating accounts for about 80% of a typical heat pump's yearly energy use.
Is a heat pump cheaper than gas heat in Ohio?
For a typical home, heating with an efficient heat pump costs about $1,395 a year versus $1,012 with a 95% gas furnace at Ohio's average prices. With cheap gas and comparatively expensive electricity, gas heating is cheaper to run in Ohio. A dual-fuel system (heat pump plus gas backup) is often the lowest-cost setup here.