Cheapest heat pumps to run in North Dakota
Ranked by estimated yearly cost if each model served the same 36,000 BTU/h (3-ton) load in North Dakota, so size doesn't distort the comparison. Because North Dakota's climate weights heating more heavily, HSPF2 (heating efficiency) matters most here. Choosing the most efficient model over the least efficient one in our database saves about $866 a year for the same load.
| # | Model | Type | Size | HSPF2 | SEER2 | 5°F kept | 3-ton cost/yr |
|---|---|---|---|---|---|---|---|
| 1 | Fujitsu AOUH09KTAP1 | Mini-split | 1 ton | 14 | 33.5 | 142% | $1,057 |
| 2 | Fujitsu AOUH12KTAP1 | Mini-split | 1 ton | 13.7 | 31.5 | 106% | $1,083 |
| 3 | Bryant 37MARAQ09AA3 | Mini-split | 1 ton | 13.9 | 19.6 | 78% | $1,110 |
| 4 | Bryant 37MAHAQ09AA3 | Mini-split | 1 ton | 13.8 | 20.6 | 99% | $1,112 |
| 5 | Bryant 37MARAQ18AA3 | Mini-split | 1.5 tons | 13.5 | 20 | 71% | $1,137 |
| 6 | Senville SENA-24HF-OG | Mini-split | 2 tons | 13.5 | 19 | 83% | $1,143 |
| 7 | Fujitsu AOUH15KTAP1 | Mini-split | 1 ton | 13 | 28.7 | 106% | $1,144 |
| 8 | Mitsubishi Electric SUZ-AA09NL*** | Mini-split | 1 ton | 12.9 | 17.6 | 53% | $1,200 |
| 9 | Senville SENA-09HF-OG | Mini-split | 1 ton | 12.5 | 21.4 | 96% | $1,212 |
| 10 | Bryant 37MAHAQ18AA3 | Mini-split | 1.5 tons | 12.4 | 18 | 90% | $1,240 |
| 11 | Senville SENA-18HF-OG | Mini-split | 1.5 tons | 12.3 | 18 | 90% | $1,250 |
| 12 | Senville SENA/09HF/OQ | Mini-split | 1 ton | 12 | 20.2 | 90% | $1,265 |
Best cold-weather performers for North Dakota
North Dakota is a very cold state, so heating dominates the bill and backup resistance heat is the biggest risk to running costs. These cold-climate certified models keep the most of their heating capacity at 5°F.
- Size
- 1 ton
- HSPF2
- 14
- SEER2
- 33.5
- Heat at 5°F
- 142%
- Size
- 1 ton
- HSPF2
- 10.5
- SEER2
- 22
- Heat at 5°F
- 133%
- Size
- 1.5 tons
- HSPF2
- 10
- SEER2
- 20.5
- Heat at 5°F
- 120%
- Size
- 2.5 tons
- HSPF2
- 9
- SEER2
- 21
- Heat at 5°F
- 112%
- Size
- 1.5 tons
- HSPF2
- 11.4
- SEER2
- 24.5
- Heat at 5°F
- 112%
- Size
- 1.5 tons
- HSPF2
- 10
- SEER2
- 17.5
- Heat at 5°F
- 110%
- Size
- 1 ton
- HSPF2
- 11.2
- SEER2
- 30
- Heat at 5°F
- 108%
- Size
- 3 tons
- HSPF2
- 8.5
- SEER2
- 17.5
- Heat at 5°F
- 108%
Heat pump vs. gas furnace in North Dakota
To heat the same home (2,900 full-load heating hours at 36,000 BTU/h) in North Dakota, a typical heat pump (HSPF2 9.5) would cost about $1,463 a year, an efficient one (HSPF2 10) about $1,390, versus $1,007 for a 95% gas furnace and $1,196 for an older 80% furnace, at North Dakota's average residential gas price of $9.50 per thousand cubic feet. With cheap gas and comparatively expensive electricity, gas heating is cheaper to run in North Dakota. A dual-fuel system (heat pump plus gas backup) is often the lowest-cost setup here.
Heating only; a heat pump also provides cooling, while a furnace needs a separate air conditioner. Gas prices: EIA, residential, annual average. Compare all states.
Assumptions for North Dakota
| Residential electricity price | 13.31¢/kWh (EIA Electric Power Monthly, Aug 2026, preliminary) |
| Climate group | Very cold |
| Equivalent full-load heating hours | 2,900 per year |
| Equivalent full-load cooling hours | 450 per year |
Use the calculator on any model page to replace these with your own electricity rate and usage.
Frequently asked questions
How much does it cost to run a heat pump in North Dakota?
Using North Dakota's average residential electricity price of 13.31¢/kWh, a typical 3-ton, median-efficiency heat pump costs about $1,605 a year to run. The most efficient model in our database would cost about $1,057 for the same load.
Is electricity expensive in North Dakota?
North Dakota's residential rate of 13.31¢/kWh is 27% below the U.S. average of 18.16¢ and ranks #48 most expensive of 51 (EIA, August 2026).
Is heating or cooling the bigger cost in North Dakota?
With our climate assumptions for North Dakota (2,900 heating and 450 cooling hours), heating accounts for about 91% of a typical heat pump's yearly energy use.
Is a heat pump cheaper than gas heat in North Dakota?
For a typical home, heating with an efficient heat pump costs about $1,390 a year versus $1,007 with a 95% gas furnace at North Dakota's average prices. With cheap gas and comparatively expensive electricity, gas heating is cheaper to run in North Dakota. A dual-fuel system (heat pump plus gas backup) is often the lowest-cost setup here.